Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Interior Section: Seat Belt
Model Year: 2008 Model: Sequoia Doc ID: RM000003H4M000X
Title: SEAT BELT: REAR NO. 1 SEAT OUTER BELT ASSEMBLY: REMOVAL (2008 Sequoia)

REMOVAL

HINT:

  • Use the same procedure for the LH side and RH side.
  • The procedure listed below is for the RH side.

1. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (for Manual Seat)

(a) Remove the rear No. 2 seat assembly SEAT: REAR NO. 2 SEAT ASSEMBLY (for Manual Seat Type RH Side): REMOVAL (2008 Sequoia) .

2. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (for Power Seat)

(a) Remove the rear No. 2 seat assembly SEAT: REAR NO. 2 SEAT ASSEMBLY (for Power Seat Type RH Side): REMOVAL (2008 Sequoia) .

3. REMOVE REAR SEAT CUSHION HINGE LOWER COVER RH INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+

4. REMOVE REAR FLOOR STEP NO. 1 COVER INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+

5. REMOVE REAR FLOOR STEP NO. 2 COVER INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+

6. REMOVE REAR DOOR SCUFF PLATE RH INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+

7. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+

8. REMOVE ROPE HOOK ASSEMBLY INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+

9. REMOVE REAR FLOOR MAT SUPPORT PLATE INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+

10. REMOVE QUARTER TRIM PANEL ASSEMBLY RH (for Manual Seat) INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+

11. REMOVE QUARTER TRIM PANEL ASSEMBLY RH (for Power Seat) INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+

12. REMOVE REAR WINDOW SIDE GARNISH ASSEMBLY RH INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+

13. REMOVE REAR SIDE NO. 2 AIR DUCT HEATING / AIR CONDITIONING: REAR AIR CONDITIONING UNIT: REMOVAL (2008 Sequoia)+

14. REMOVE REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH

(a) Remove the bolt.

(b) Remove the 2 bolts and rear No. 1 seat outer belt assembly.

15. REMOVE REAR NO. 1 SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY

(a) Remove the 2 bolts and rear No. 1 shoulder belt anchor adjuster assembly.